How to Buy the Right Tools for Appliance Repair

If you are opening an appliance repair business or would like to be more specific like a commercial oven repair service, you need the right tools. It is important to know the right kind of tools for repairing any appliance and learning how they should be used is important. You should not try repairing anything without knowing how each one is used because you might end up causing more damage. When you are hiring new staff, you should also be able to give them the tools they need to complete a job. Using each tool correctly and even choosing each one correctly is important. Read this article to find out more about buying the right tools.

Screwdriver Kit

At the minimum, you would need a Philips style and slot screwdriver. Based on the kind of appliance you should repair; you might also need a Torx screwdriver. Investing in a good cordless drill and a comprehensive screwdriver bit set is better.

Nut Driver Set

It is an excellent idea to have metric and English sizes since some appliances are using metric fasteners.

Tester Screwdriver

A tester screwdriver is a tool you hold with your hand that is used in appliance repair to find out whether there is electricity flowing through the circuitry or not. It is also for checking which appliance wires are hot, grounded, or neutral.

Protective Overalls

These overalls will make you look very professional and you can put your uniform over them to keep yourself clean and protected from the chemicals you will use.


Needle-nose pliers are great for holding onto small pieces; they are also used for bending and cutting wires. You can use the channel-lock pliers to loosen the water hose fittings on washers and dishwashers. The standard type of pliers can easily help you release the hose clamps.

Wrench Kit

The screwdriver bit set you have should have several nut drivers that are in different sizes. The most common ones for appliance repairs is the 5/16, 3/8, and ¼ inch nut drivers.

Safety Goggles

Safety eyewear is important for protecting your eyes against particles or chemicals while doing repairs. This way, you will not be interrupted by anything that might go into your eyes as you do the repair.

Putty Knife

Putty knives are great for prying components that will fit the tab to the slot. A putty knife is excellent to have in your tool kit in order to scrape up the debris that you might find while you move through your repair. For any accidental messes you might be making along the way, you can use this tool.

Wrench Set

Wrenches are available in different styles for several applications especially when it comes to appliance repair. Some are designed so they can be used with the standard fasteners and some are perfect for metric applications.

Items for Work Safety

Before you work on any electrical appliance you should think about disabling, disconnecting, detaching, and disengaging or unplugging the appliance from the power source. If you forget to do this, you will be shocked and you might not forget to separate the appliance from the power source next time.

When you handle appliances using sharp edges, you should wear gloves.

You will also need a flashlight because you need to be able to see all the wires and different parts of the appliance you are working on. This will also prevent you from cutting the wrong wire or removing the wrong part.

These are the tools you will need for a commercial gas oven repair DC or any repair you will do.